BXRPJ - 1000 F-38 - EXTREME HIGH GLOSS-TRIM, DOCK & (SUPDAT)

  • MSDS: BXRPJ
  • Manufacturer: PRO LINE PAINT CO
  • Product Name: 1000 F-38 - EXTREME HIGH GLOSS-TRIM, DOCK & (SUPDAT)
  • National Stock Number: 8010-00N060121
Product Identification

Product ID:1000 F-38 - EXTREME HIGH GLOSS-TRIM, DOCK & (SUPDAT)
MSDS Date:05/20/1993
FSC:8010
NIIN:00N060121
MSDS Number: BXRPJ

Responsible Party
PRO-LINE PAINT CO
2646 MAIN ST
SAN DIEGO, CA 92113-3697
US

Emergency Phone: 619-728-3192

Info Phone: 619-231-2313

Preparer: E. SOETERIK

Cage: 9D157

Contractor
PRO-LINE PAINT CO
SAN DIEGO, CA 92113-3697 US

Telephone: 619-231-2313; 619-232-8968

Cage: 9D157

Ingredients

ALKYD RESIN; (ALKYD RESIN, SOLUTION CONTAINING INGS 2 & 3)

CAS: 63148-69-6

Fraction By Weight: 53%

OSHA PEL N/K

ACGIH TLV: N/K


STODDARD SOLVENT; (MINERAL SPIRITS)

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 42.50%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 20-45%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 10.85%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


MINERAL SPIRITS

CAS: 64842-47-8

Fraction By Weight: 16%

OSHA PEL 400 PPM (MFR)

ACGIH TLV: 400 PPM (MFR)


ZIRCONIUM; (ZIRCONIUM CARBOXYLATE CONTAINING ING 8)

CAS: 7440-67-7

RTECS: ZH7070000

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3;10 STEL


LIGROINE; (MINERAL SPIRITS 60%)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 0.15%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


420 G/L.

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NAUS, DIZZ, HDCH & CONVLS.
INHAL:INHAL OF HIGH VAP CONCS MAY HAVE RSLTS RANGING FROM DIZZ &
HDCH TO UNCON. SKIN CONT:BURNING SENSATION FROM VAP/LIQ. DERM,
SENSIT. EYE:CONT CAN CAUSE SEV IRRIT, R EDNESS, TEARING & BLURRED
VISION. SKIN ABSORPTION:LIQ IS MOD IRRIT WHICH MAY RSLT IN IRRIT &
DERM. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INGEST:TOX IF SWALLOWED. CAN CAUSE
BURNING SENSATION, VOMIT, DIARR, DROW. CHRONIC:CONTINUOUS RPTD &/OR
PRLNG IRRIT CAN LEAD TO DERM. REPORTS HAVE SHOWN THAT ASSOC RPTD &
PRLNG OCCUP OVEREXP T O SOLVS CAN CAUSE PERM BRAIN & NERV SYSDMG.
INTENTIONAL MISUSE BY DELIB CONC & INHAL CONTENTS MAY BE
HARMFUL/FATAL.
Medical Cond Aggravated by Exposure:ASTHMA & SKIN ALLERGIES. CAN CAUSE
DISCOMFORT TO PEOPLE W/THESE ALLERGIES, BUT NORMALLY IT IS NOT A
PROBLEM.

First Aid

First Aid:EYE:FLUSH IMMED W/FRESH WATER BY EYE WASH APPARATUS/BY HAND
FOR AT LST 15 MINS. SEEK MED ATTN. SKIN:WASH IMMED W/WATER. THEN
WASH W/SOAP & WATER, RINSE IMMED. SEEK MED ATTN. INHAL:MOVE PERSON
TO FRESH AIR; ARTF RESP IF NECESSARY. SEEK MED ATTN. INGEST:SEEK
MED ATTN. RECS TO MD:IN ACUTE CASES SEEK MED ATTN IMMED. FOR
WORKERS WHO MAY BE EXPOS REGULARLY, PROVIDE DETAILED PERIODIC
EXAMINATIONS.

Fire Fighting

Flash Point Method:TCC
Flash Point:101F,38C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:WATER FOG, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
BLANKET FLAME W/ONE OF EXTING MEDIA. VAPS OF COMBUST MAY BE IRRIT
TO RESP TRACT. MAY CAUSE BRTHG (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS &
OPEN FLAMES.

Accidental Release

Spill Release Procedures:REMOVE ALL TYPES OF IGNIT SOURCES. PROVIDE
SUFFICIENT VENT. PROT CLEAN-UP PERSON W/NIOSH/MSHA APPRVD 8540 3M
CORP RESP & GOGGS. USE METAL CNTNR MARKED "DO NOT REUSE". PUT MATL
IN THIS CNTNR. USE VERMI CULITE/OTHER INERT ABSORB. KEEP AWAY FROM
SEWER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE ONLY W/ADEQUATE VENTILATION. TRAIN
EMPLOYEES ON ALL SPECIAL HANDLING PROCEDURES IN THIS MSDS BEFORE
THEY WORK W/THIS PRODUCT.
Other Precautions:PROTECT AGAINST PHYSICAL DAMAGE TO CONTAINERS &
SPILLAGE. STORE IN A COOL, WELL VENTILATED AREA W/SPRINKLER SYSTEM.
KEEP AWAY FROM HEAT. POST NO SMOKING SIGNS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPRVD DUST/MIST RESP (HIGH
EFFICIENCY CARTRIDGE ADVISED) IF SPRAYING/SANDING. USE NIOSH/MSHA
APPRVD ORG VAP CARTRIDGE RESP IF TLV FOR SOLV COMPONENTS MAY BE
EXCEEDED E.G., NIOSH/MSHA A PPRVD 8540 3M CORP RESP. WHEN (SUPDAT)
Ventilation:USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED
AREAS. KEEP VAPORS BELOW TLV.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:USE PROT CLTHG & CHANGE CONTAM CLTHG IMMED.
PROVIDE EMER SHOWERS & EYEWASH AT STATIONARY PAINT APPLICATION
FACILITIES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:STRIPING PAINT - BROWN. FIRE FIGHT
PROC:DFCLTIES. PVNT HUMAN EXPOS TO FIRE, SMOKE, FUMES, ETC. HAZ
DECOMP PROD:& CARBON MONOXIDE. RESP PROT:USING IN CONFINED AREA,
USE AIR-FED HOOD. EYE PROT:& FULL LENGTH FACESHIELD .

Chemical Properties

Boiling Pt:B.P. Text:>310F,>154C
Vapor Pres:5 @ 20C
Vapor Density:4.8
Spec Gravity:1.14
Evaporation Rate & Reference:0.22 (BUTYL ACETATE=1)
Solubility in Water:NIL
Appearance and Odor:OPAQUE COLORED LIQ W/MILD HYDROCARBON ODOR. ODOR IS
NOT ADEQ WARNING OF INTOX.

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAMES. DO NOT ALLOW
VAPORS TO ACCUMULATE.
Hazardous Decomposition Products:FLAMM FUMES MAY ACCUM IN CONFINED AREA
& SPKS/OPEN FLAMES MAY IGNITE IT. COMBUST WILL PRDCE SOME CARBON
DIOXIDE (SUPDAT)
Conditions to Avoid Polymerization:EXTREME HEAT.

Disposal

Waste Disposal Methods:DISPOSE OF ALL WASTES I/A/W FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.